Sound-devices 702T Manual do Utilizador descarregar pdf (Página 68)

702T User Guide and Technical Information

v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

# Setup Name Setup Description Setup Options

Rec: Pre-Roll Time

Selects the amount of pre-roll time the 702T

will add to the beginning of each file.

0–10 sec. @ 48 kHz

0–5 sec. @ 88.2–96.096 kHz

0–2 sec. @ >96.096–192 kHz

Rec: Dither

Selects whether to dither is added to 24 bit

digital signals while recording 16 bit files.

• Off

• On (16 bit only)

Rec: Timer Start

Sets a specific start time/date for unattended

recording. Unit must be powered.

Rec: Timer Stop

Set a specific time/date to stop recording.

May be used with or without the Rec: Timer

Start. May be set before the Timer Start time

to temporarily stop recording and then resume

recording with Timer Start.

Rec: Record Indicator

Sets how the large display looks when the unit

enters record.

• Normal Numbers

• Reverse Numbers

• Flash Numbers

Rec: Record Pause

Allows a recording to be stopped then

continued without creating a new take or file.

Time Code Mode must be set to Off to enable

Record Pause.

• Disabled

• Enabled

17 Input: Routing Allows the user to setup their routing matrix

among all available inputs and tracks. There

are preset routings and three custom routings

available. Pressing the input select key repeat-

edly will cycle through all preset routings.

Primarily accessible from the Input Select Key.

• 1  A

• 1  A / 2  B

• 1  A / 1  B

• 1  A,B / 2  A,B

• Custom Route 1

• Custom Route 2

• Custom Route 3

Input 1: 48V Phantom

Input 2: 48V Phantom

Enables or disables 48 V phantom power on

inputs 1 and 2.

• Off

• On - Mic

• On - Mic and Line

Mic Inputs: Limiter

Enables or disables the analog input limiter on

input 1 and 2 mic preamps.

• Disabled

• Enabled

Mic Input 1: Low Cut

Mic Input 2: Low Cut

Enables the high-pass (low cut) filter to reduce

sensitivity to low frequencies.

• Disabled

• Enabled

Mic Input 1: Low Cut Freq

Mic Input 2: Low Cut Freq

Selection of twelve high-pass filter frequency

and slope combinations for microphone inputs.

• 40, • 80, • 160, • 240 Hz @ 12 dB/oct

• 40, • 80, • 160, • 240 Hz @ 18 dB/oct

• 40, • 80, • 160, • 240 Hz @ 24 dB/oct

Mic Input 1: Gain Range

Mic Input 2: Gain Range

Selects the sensitivity of the microphone input.

Low sensitivity is used for very loud and/or

very hot microphones.

• Normal

• Low

• Normal, fades to off

• Low, fades to off

Input 1, 2: Source

Forces the inputs to analog or digital mode.

Default is auto-select.

• Auto-select

• Analog

• Digital (S/PDIF/AES)

• Disabled (Power Save)

Input 1,2: Linking, MS

Selects whether the input 1 & 2 levels are

controlled independently or grouped as a pair

with or without mid-side decoding.

• Unlinked

Inputs 1 and 2 operate independently

• Linked 1/2

Inputs are linked, channel 1 pot controls level, chan-

nel 2 pot controls pan

• Linked 1/2 and MS

Inputs are linked, channel. 1 pot controls level,

channel. 2 pot controls pan and are decoded for MS

stereo.

Line Input 1,2: Gain Control

When inputs 1 and 2 are in LINE input mode,

selects whether the gain setting is controlled

by the front panel knobs or by the menu

sensitivity settings below.

• Use front panel knobs

• Use sensitivity settings

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 83 84

Comentários a estes Manuais

Sem comentários

Sound-devices 702T Manual do Utilizador Página 68

Comentários a estes Manuais

Manuais e produtos relacionados com Áudio Sound-devices 702T